Liquid Flow
0.5 ml/min to 500 l/min
Our UKAS, ISO 17025 accredited laboratory can cover the following range 0.5 ml/min to 500 l/min
The Labcal gravimetric water flow calibration facility uses the principle of mass and time to measure liquid flow. This method is one of the most accurate for the calibration of liquid flow meters.
Typical flow meters we can calibrate are:
- Variable area glass and metal tube types
- Positive displacement
- Turbine
- Mass flow meters including Coriolis
- Vortex shedding
- Ultrasonic
- Target
- Magnetic
Gas Flow
Range 0.025 ml/min to 13000 l/min
Our UKAS, ISO 17025 accredited laboratory can cover the following range 0.025 ml/min to 13000 L/min
Calibration can be undertaken on air, nitrogen, oxygen, helium, argon, carbon dioxide and any other inert gases.
Types of flow meters include:
- Variable area flow meters (glass and metal tube type)
- Dry and Wet gas flow meters
- Positive displacement flow meters
- Turbine flow meters
- Laminar flow elements
- Mass flow meters and controllers
- Bubble and piston flow meters
- Nozzles
- Orifice plates
- Vortex shedding flow meters
We also supply a range of VA FLOW METERS
Pressure
0 to 1400 bar
Our UKAS, ISO 17025 accredited laboratory can cover the following range 0 to 1400 bar
We specialise in the accurate calibration of low differential pressure which is essential for measuring the pressure in ducts and the calibration of pitot tubes. We utilise several pneumatic and hydraulic dead weight testers which measure gauge and absolute pressures from a fraction of a Pascal to 1400 bar.
Typical pressure instruments we are able to calibrate are:
- Pressure gauges
- Digital pressure indicators
- Barometers
- Differential pressure indicators
- Liquid manometers
- Micro manometers
- Pressure Calibrators
- Pressure Transducers
- Pressure Transmitters
- Pressure equivalent calibration of dead weight testers (pressure balance with mass set)
Temperature
-30 to 140 °C
Our UKAS, ISO 17025 accredited laboratory can cover the following range -30 to 140 °C
Typical instruments we calibrate are:
- Temperature Indicators
- Thermocouples
- Platinum Resistance Thermometers
- Data Loggers
- Thermistors
- Transmitters
- Weather Stations
Humidity
Humidity range: 10 – 90% RH
Temperature range: 10 – 50°C
Our UKAS, ISO 17025 accredited laboratory can cover the following range
Humidity range: 10 – 90% RH
Temperature range: 10 – 50°C
Typical instruments we can calibrate are:
- Digital Humidity and temperature Indicators
- Transmitters
- Data Loggers
- Weather stations
Air Velocity
0.1 to 80 m/sec
Our UKAS, ISO 17025 accredited laboratory can cover the following range -0.1 to 80 m/sec
Labcal is equipped with UKAS accredited LASER technology to measure air velocity very accurately in our wind tunnels.
- Vane anemometers
- Pitot tubes
- Hot wire anemometers
- Cup anemometers
- Propeller
- Ultrasonic anemometers
Labcal has three wind tunnels within its UKAS laboratory
Open Path:
- Range: 0.1 m/sec to 27 m/sec - UKAS Accredited.
- Working Section: 150 mm diameter
Closed Path:
- Range: 5 to 80 m/s – UKAS Accredited. 80 to 100 m/s - traceable to ISO 17025
- Working Section approx. 0.5m x 0.5m, Temperature Control ± 0.1 ˚C
We can also supply ultrasonic anemometers
